Heat shrink cable jointing kits are used to ensure a secure and reliable connection of electrical wires. They protect against environmental factors such as dust and chemicals. This makes them useful in the UAE due to its arid environment.
So, let鈥檚 see what essentials you need to apply a heat shrink cable jointing kit.
Materials Required for Heat Shrink Cable Jointing Kits
Before you go ahead with the application process itself, make sure you have the tools necessary for it. There are several things you will need like:
- 路 Gas Torch or a Heat Gun
- 路 Wire Strippers
- 路 Safety Goggles and Gloves
- 路 Cleaning Supplies
- 路 Crimping tool or soldering iron
- 路 Insulation tape
Application Process for Heat Shrink Cable Jointing Kits
Once you have all the necessary materials, you can proceed to apply the heat shrink cable jointing kits. Make sure to wear your safety goggles and gloves before starting.
- 1. First, clean the wire ends of any grease or dirt using your cleaning supplies. Using alcohol wipes is ideal, but a dry rag will also suffice. Do not use any wet material to clean your wires.
- 2. Second, strip the insulation from both ends of your electrical cables to expose the conductors. Make sure to check the size of the connector in your heat shrink cable jointing kit. Use this to measure the length of the conductor needed to be exposed.
- 3. The third step will be different depending on your connector. If you are using a crimp connector, use the crimping tools provided to secure the connection between the connector and the conductor.
- If soldering is your choice, then twist the conductors together and use the soldering iron to bind both of them.
- 4. Fourth, slide the heat shrink tubing, provided in your heat shrink cable jointing kit, over one of the cables. Make sure to do this before connecting the wires. If your kit has come with a sealant strip, wrap it around the wires before putting on the heat shrink tube.
- Once you have completed connecting your cables. Slide the heat shrink tube over the joint. Ensure that the tube covers your entire connection area.
- 5. Fifth, heat the tubing using your heat gun or gas torch, until it tightly shrinks around the joint. Heat the tube evenly by moving your heat source around it to cover the entire tube. The exact time will vary, but the process should not take more than a couple of minutes.
- 6. Sixth, allow the tube to cool down. Once it has cooled down, check the tube for any gaps or loose areas.
- 7. Finally, test the connections to see if they function properly. If they work, then apply some insulation tape on the joint for extra protection.
Conclusion
Heat shrink cable jointing kits are a great way to protect your electrical cables from environmental hazards. While the process can be done by anyone, it is highly advised that you call a professional to better handle the application process. So, if you are living in the UAE and are looking for heat shrink cable jointing kits or any other electrical devices, call Customer Delight Trading LLC today. The company specializes in providing sales & service in all types of electrical and instrumentation and mechanical products.